Epoxy Grouting Services

Approx. Rs 3,500 / Square MeterGet Latest Price

Product Brochure Conbextra EP10(M) is a two part epoxy resin system for grout ing gaps ranging from 0.25mm to 10mm. It is an all liquid system consisting of a base and hardener. Advantages
1)Moisture insensitive
2) Low creep characteristics 
3) High compressive, tensile and flexural strengths
4) Fast, convenient pumping with early strength gain
5)Withstands a wide range of chemicals
Application instructions  Prepare the surface and seal the cracks with a sealing com pound which can also be used for bonding injection nipples. Depending on the crack width and depth the distance between nipples should be 200 to 500 mm.
Mixing and placing Pour all the contents of the hardener pack into the base con tainer. Mix using a slow speed power mixer for 60 seconds. Use a suitable pressure pump for injecting the material into cracks. After 24 hours remove the nipples and seal the holes or voids with more sealing the compound and allow to cure. For filling cracks of more than 10mm and using as an epoxy mortar Conbextra EP10(M) has to be mixed with clean graded quartz sand from 1:3 to 1:6 parts by weight depending on the con sistency required. Mixing can be done with a paddle fitted to a drilling machine.