Waterproof Coating

Approx. Rs 95 / KgGet Latest Price

Approx. Rs 235 / KgGet Latest Price

Additional Information:

Approx. Rs 145 / KgGet Latest Price

Crystalline Water Proof Material VANDEX SUPER is a cementitious, ready-mixed, in-depthwaterproofer. VANDEX SUPER is based on grey Portland cement.
AREAS OF APPLICATIONsubstrate: concrete active or passive waterproofing and protection against water and moisture foundations, slabs, retaining walls, construction joints, sewage treatment plants, swimming pools, backfilled structural elements, etc. drinking water structures 
VANDEX SUPER is applied to a concrete surface the active chemicals combine with the free lime and moisture present in the capillary tract, to form insoluble crystallinecomplexes.

Additional Information:

Approx. Rs 251 / KgGet Latest Price

Dr. Fixit Flexi PU 270(I) is liquid-applied, highly permanent elastic, cold applied and cold curing, one component polyurethane membrane used for long-lasting waterproofing. Solvent based with low VOCs properties. The Dr. Fixit Flexi PU 270(I) is based on pure elastomeric hydrophobic polyurethane resins, which result in excellent mechanical, chemical, thermal and natural element resistance properties. Dr.Fixit Flexi PU 270(I) reacts with ground and air moisture to cure.

Approx. Rs 105 / KgGet Latest Price

Approx. Rs 127 / KgGet Latest Price

Approx. Rs 71 / sq ftGet Latest Price

Crystalline waterproofing is a method used to prevent water ingress in concrete structures. This technique involves the application of a crystalline waterproofing product, which reacts with moisture and certain compounds in the concrete to form a network of crystals. These crystals fill in the pores and capillaries within the concrete, effectively blocking water pathways.

1. Durability: The crystalline structures are formed within the concrete, making them resistant to deterioration over time.
2. Self-Sealing: If cracks develop, the crystals can react with water to seal them, maintaining waterproofing effectiveness.
3. Breathability: It allows moisture vapor to escape, which helps prevent damage from trapped moisture.
4. Non-Toxic: Most crystalline products are safe for the environment and do not emit harmful chemicals.

Approx. Rs 240 / KgGet Latest Price

Approx. Rs 3,501 / KgGet Latest Price

Approx. Rs 200 / LitreGet Latest Price

Additional Information:

Approx. Rs 30 / KgGet Latest Price

• UsesIt can be used to repair damaged reinforced concrete, and for structural strengthening, encasement build-ups, jacketing, and piletop encapsulation resin systems

Approx. Rs 270 / LitreGet Latest Price

Additional Information:

Approx. Rs 125 / KgGet Latest Price

Mak Crete MWP is an acrylic based polymer
modified cementitious water proofing system. The Mak Crete MWP polymer, when mixed with cement will provide the unique solution to all problems related to water leakage and protects from severe fungus, salt penetration,or environmental attack in the following structures:
Bathroom and any floor to dampness
Water Tanks or swimming pools
General concrete repair
Basements, Retaining Walls, tunnels, etc.
Against corrosion and salt attacks
Roof Slab, Parapet, Terrace, Balconies.
When mix with the cement, it will provide
better adhesive properties,impact resistance, flexural strength, and thin section fragility when compared with ordinary cement mortar.

Approx. Rs 3,585 / PackGet Latest Price

Approx. Rs 300 / KgGet Latest Price

• Roof / Terraces, including corrugated roof Podium
• Refurbishment of APP / SBS / TarFelt roof
• Gutter waterproofing.

• White ShaliUrethane BTD has excellent SRI of 109, thus facilitates energy saving and provides good cooling effect under the treated surface. 
• White ShaliUrethane BTD is recommended for all slope roofs and not trafficable roofs, which needs no protection
• Can be applied on moist surface also
• Excellent water vapour barrier
• High Crack Bridging
• Monolithic / seamless / breathable in-situ Membrane
• Excellent adhesion to concrete
• Excellent elongation and very good low temperature flexibility.

• Remove all loose gravel, dirt, oil, grease and foreign matter by jet of dry air and clean the surface mechanically or by grinding to make it smooth before application
• Repair all cracks by cutting “V” groove and fill with PMC mortar prepared in the ratio of ShaliCrete : Cement : Sand (1 : 2 : 5)
• Provide 75 mm x 75 mm coving made out of PMC mortar as above, using ShaliSBR Latex as bond coat
• Ensure gradient of 1 : 100 towards drain by laying PCC admixed with integral waterproofing compound, ShaliPlast LW+ @ 200 ml / bag of cement preferably with galvanised chicken wire mesh
• Ensure that there is no standing water on the applicable surface.

• Stir ShaliUrethane BTD by a slow speed mixture fitted with a suitable mixing paddle to ensure a homogenous mix
• After stirring, wait for the product to settle in order to let entrapped air escape.

• Slightly damp the surface. Avoid standing water / ponding
• Prime the surface In case anti-root property is desired, Use ShaliPrime WP WB @ 200 grm / m2 or In other cases use ShaliPrime BTD at 400 grm / m2
• Allow the primer to touch dry condition. 
• Apply 1st coat of ShaliUrethane BTD at 1 Kg / m2 by brush / roller / airless spray while the primed surface is tacky. For faster and smoother application, apply with airless gun
• Spread non-woven geo-textile or Fibre Glass Tissue / scrimp of 45 gsm with overlaps of 50 mm in both directions when the surface is still tacky; this is optional, to be assessed as per site requirements to achieve higher mechanical properties
• Allow 1st coat to dry for 10 – 12 hr
• Apply 2nd coat of ShaliUrethane® BTD @ 1 kg / m² by brush / roller / airless spray for final DFT of 1500 micron in two coats
• Ensure final curing time of 36 hrs before allowing / carrying out any further work
• Extend waterproofing treatment up to 200 mm and terminate into groove on the parapet wall. Fill the groove with PMC mortar with ShaliSBR Latex

Approx. Rs 1,350 / RollGet Latest Price

Approx. Rs 55 / sq ftGet Latest Price

Additional Information:

Approx. Rs 80 / sq ftGet Latest Price

Additional Information:

Approx. Rs 270 / KgGet Latest Price

Additional Information:

Approx. Rs 120 / KgGet Latest Price

High performance elastomeric cementitious
waterproof coating.
Brushbond RFX is an high performance elastomeric cementi￾tious coating used for waterproofi ng and to protect atmospheri￾cally exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen & water. Brushbond RFX is suitable for all types of structures including those in coastal
environments.

Additional Information:

Approx. Rs 150 / KgGet Latest Price

Approx. Rs 251 / KgGet Latest Price

Additional Information:

Approx. Rs 165 / KgGet Latest Price

Approx. Rs 626 / LitreGet Latest Price

Approx. Rs 85 / KgGet Latest Price

Approx. Rs 415 / KgGet Latest Price

Approx. Rs 310 / KgGet Latest Price

Additional Information: