Epoxy Flooring

Approx. Rs 696 / KgGet Latest Price

Product BrochureProduct Details:

ShaliFloor SL T 3 ES (Formerly known as ShaliScreed SL T) is self levelling three component transparent screed epoxy flooring with graded multi-colored aggregates for use where higher strength and toughness is needed apart from the leveled surface. ShaliFloor SL T 3 ES has excellent adhesion and provides good abrasion resistance on floors with heavy duty traffic. ShaliFloor SL T 3  ES is applied in thickness from 3 mm to 5 mm.

Application

• Power houses.
• Bottling plants.
• Pharmaceutical Industries / Hospitals.
• Electronic Industries.
• Call centers.
• Biological laboratories.
• Oil rigs.

Advantages

• Quick and easy to lay.
• Seamless and durable.
• High strength.

Application Methodology
Surface Preparation

• Prepare the surface by mechanical grinding or other suitable method.
• Remove dust, flakes, oil, grease or other loose foreign particles by sand blasting, iron brush or compressed air. Remove old painting using surface grinder.
• Remove old painting using surface grinder.
• For best bond, concrete surface must be slightly textured.
• Allow it to dry before priming.

Material Preparation

• Mix ShaliFloor SL T 3 ES component A (Resin) & B (Hardener) thoroughly by using speed drill mixer with a spiral type blade at the bottom of stirrer rod. The speed may be 1000 rpm till homogeneous mix is obtained. Then add component C (Filler) slowly, ensuring complete dispersion. After all of component C has been added, mix for a minimum of 5 to 10 minutes.
• After stirring, wait for the product to settle in order to let entrapped air escape.

Application of Material

• Prime concrete surface with ShaliPrime 2E and allow it to dry for 6 – 8 hrs till it is touch dry.
• Lay ShaliFloor® SL T 3 ES after mixing is over. Spread mix evenly over recommended area using a steel trowel with notches.
• Anchor ShaliFloor® SL T 3 ES near walls, around columns / foundations and at edges of trenches / cutters / bays and expansion joints.
• Use spike roller with long handle on applied ShaliFloor® SL T 3 ES to remove entrapped air. Ensure that the spike roller is not applied too long to leave any permanent indentation on surface.
• When applied over steel surfaces, underlayment of ShaliFix RM C is must. Thickness of ShaliFix RM C should be maintained minimum of 5 mm. For application methodology of ShaliFix RM C, refer to TDS of ShaliFix RM C.
• Compact the material by tamping with a wooden float. Finish off by trowelling with steel trowel to a smooth finish.

Limitations

• Do not apply ShaliFloor® SL T 3 ES on surfaces known to, or likely to, suffer from rising dampness, potential osmosis problems or having relative humidity greater than 75 %.
• Do not apply ShaliFloor® SL T 3 ES to asphalt, weak or infirm concrete, unmodified sand / cement screeds, PVC tiles or sheets, or substrates known to move substantially e.g. steel walkways.
• Do not install ShaliFloor® SL T 3 ES at temperature 45 OC.
• In common with all epoxy material some light shed may fake in the long term, when place in adverse exposed condition. Such changes, if any, are normal and have no effect of performance of ShaliFloor® SL T 3 ES.

Cleaning & Maintenance

• Clean all tools immediately after use with xylene. Do not allow material to harden.
• Service life of a floor will be considerably extended by good housekeeping. Regular cleaning may be carried out using a rotary scrubbing machine with a warm miscible cleaning agent at temperature up to 50 OC.